Finishing

Downdraft Booth

background shape

Air enters through ceiling intake plenum and is pulled vertically down, across the vehicle and into the floor which then exhausts into the atmosphere

These booths offer efficient maximum environmental contamination control, overspray control for reduced prep time, and are ideal for precision painting and high-end applications. The full ceiling air intake, direct fired heat and recirculating air make up make these booths the ultimate finishing solution.

Note: Downdraft booths require the ability and expense of installing and maintaining a pit.

Essential Automotive Booth Features

  • Single-skin steel fabrication
  • Patented Controlled Airflow Ceiling
  • Four-tube sidewall light fixtures and premium ceiling light fixtures
  • Three-wing, dual-skin product door (with three observation windows)
  • Personnel door
  • Economy mode
  • Engage control panel
  • NFPA, ETL, ETL-C, UL/CUL compliant
  • AdvanceCure® Accelerated Airflow System
  • Four-wing, dual-skin product door
  • Six-tube, T8 LED light fixtures
  • Drive-thru configuration
  • Additional sidewall light fixtures
  • LOGIC 3 or LOGIC 4 controls (with SmartFlash and SmartCure)
  • Sidewall observation windows
  • 24’, 27’ and 30’ lengths

Essential General Oversize Booth Features

  • Single-skin galvanized steel fabrication
  • Non-sparking, tube axial exhaust fan with belt guards and duct connector ring
  • Three-phase, TEFC, tri-voltage motor
  • Four-tube inside-access light fixtures
  • Swing-type product doors
  • Personnel door
  • Standard electromechanical control panel (not-pressurized booths)
  • Velocity ® control panel (pressurized booths)
  • NFPA, ETL, ETL-C, UL/CUL compliant
  • White pre-coated panels
  • GUL2000, BT1200 or SpaceSaver® make up air unit (airflow dependent)
  • Six-tube, T8 LED light fixtures
  • Air proving switch
  • Product Doors: Bi-folding, roll-up or drive-thru, and additional Personnel Doors
  • Observation window kit for side-wall panels
  • Conveyor or monorail support
  • Corner-style intake and exhaust chambers
  • Custom controls
  • Dual-skin insulated panels
  • Sliding doors
  • Recirculating cure mode
  • Personnel lifts
  • Outdoor booths
  • Multi-stage filtration
  • Additional safety options
  • Height, width and depth can be custom designed to meet specific requirements

Advanced Automotive Booth Features

  • Dual-skin steel fabrication
  • Patented Controlled Airflow Ceiling
  • Four-tube sidewall light fixtures and premium ceiling light fixtures
  • Three-wing, dual-skin product door (with three observation windows)
  • Personnel door
  • Economy mode
  • Engage control panel
  • Floor leveling system
  • BT1200 or SpaceSaver® make up air unit (airflow dependent)
  • NFPA, ETL, ETL-C, UL/CUL compliant
  • AdvanceCure® Accelerated Airflow System
  • Four-wing, dual-skin product door
  • Six-tube, T8 LED light fixtures
  • Drive-thru configuration
  • Additional sidewall light fixtures
  • LOGIC 3 or LOGIC 4 controls (with SmartFlash and SmartCure)
  • Sidewall observation windows
  • 24’, 27’ and 30’ lengths

Advanced General Booth Features

  • Dual-skin galvanized steel fabrication
  • Non-sparking, tube axial exhaust fan with belt guards and duct connector ring
  • Three-phase, TEFC, tri-voltage motor
  • Four-tube sidewall light fixtures and premium ceiling light fixtures
  • Swing-type product doors (filtered or solid)
  • Personnel door
  • Standard electromechanical control panel (not-pressurized booths)
  • Velocity ® control panel (pressurized booths)
  • GUL2000, BT1200 or SpaceSaver® make up air unit (airflow dependent)
  • Air proving switch
  • Bi-folding, roll-up or drive-thru product doors
  • Observation window kit for side-wall panels
  • 24’, 27’, 30’ and 33’ lengths
  • 10’, 12’ and 14’ heights
  • NFPA, ETL, ETL-C, UL/CUL compliant
  • Multi-stage filtration
  • Seismic construction
  • Conveyor or monorail support
  • Corner-style intake and exhaust chambers
  • Sliding doors
  • Additional personnel doors

Elite Automotive Booth Features

  • Dual-skin steel fabrication
  • Patented Controlled Airflow Ceiling
  • Four-tube sidewall light fixtures and premium ceiling light fixtures
  • LOGIC 4 controls (with SmartFlash and SmartCure)
  • AdvanceCure Blade® System
  • Four-wing, dual-skin product door
  • Personnel door
  • Floor leveling system
  • NFPA, ETL, ETL-C, UL/CUL compliant
  • Drive-thru configuration
  • Three-row exhaust pit upgrade
  • Raised basement (adds 13 inches to the overall height of the paint booth)
  • Additional sidewall light fixtures
  • Sidewall observation windows
  • 27’ and 30’ lengths

More To Explore

Let's Build Your Booth

Speak with our friendly and knowledgeable sales team today to inquire about your spray booth needs.

GET STARTED