HOPPER RECOVERY SYSTEM

The hopper and bucket elevator recovery systems process up to 180 cubic feet per hour of dense and coarse media, such as steel grit and shot. With the 3 ft. x 3 ft. hopper system, flush mounting requires a pit just 4 1/2 feet deep. Where a high water table prevents excavation, the smaller 2 ft. x 2 ft. system can be wall-mounted and shovel fed.

FEATURES

Floor Recovery Components - 2ft. x 2ft. surface-mount hopper, or 3ft. x 3ft. recessed hopper

Grating - 250lbs/ sq.ft. uniform load

Media Transfer - Bucket elevator with poly buckets on 4-inch wide belt; 1hp motor

Media Cleaning - Not inclluded but needed: Air wash abrasive cleaner; 1/4hp motor. Order seperately.

Media Storage - 16 cu.ft. total

Dust Collection - Not Included; ordered seperately

Electrical Specifications - 230/460 volt, 3 phase, 60hz.

Other Options - 600 cfm abrasive cleaner dust collector with 1hp motor or RP-cartridge collector with 1hp motor (required if room ventilation system cannot accommodate abrasive cleaner ventilation)